I can no longer recall or finish out of quests. Can't get any help from support

[Lornesta]

I have wasted at least 2 and half hours trying to get somebody to help me at Turbine. Ever since the last release I haven't been able to recall or finish out of quests. I play with a screen resolution of 2560x1600 and when I go to click on the Recall or Finish button at the end of a quest, the pop up that says, "Are you sure you want to recall/finish? Yes or No" pops up in the bottom right hand corner of my screen. Actually off the screen, but you can see a small piece of the menu, so I know its there. If I click ESC, it goes away and I can click on it again and see it appear. Hitting Y or N on keyboard also has no effect, so my only option is to Logout of the game or Quit out of the game since both of those seem to work if I double click on them.

I have opened at least 3 in game tickets and sent in one through the support site at ddo.com.

Here is one hour of my life spent trying to get help from the live technical support at ddo.com.....please somebody stop the madness....

Michelle: Thank you for contacting Turbine Technical Support. Which game can I help you with today?

Lornesta: DDO

Michelle: Hello Lornesta, how may I assist you?

Lornesta: Ever since the latest patch to the game, I can no longer recall or finish out of quests.

Lornesta: The pop up menu that asks me yes or no comes up off of the visible screen

Lornesta: I'm playing with a resolution of 2560x1600

Michelle: Please tell me the exact error massage which appears on your screen, if any?

Lornesta: no error message

Michelle: Please set it to 1024*768.

Lornesta: I have a 30" monitor

Lornesta: 1024*768 looks like garbage

Michelle: Okay.

Michelle: Okay Lornesta.

Lornesta: Also it has worked since the game has been out up until the latest patch

Lornesta: I can see the pop up menu appear, it just doesn't come up in the center of the screen like it used to

Lornesta: I opened a ticket about this two or three days ago with no response

Lornesta: Ticket #11992

Michelle: One moment please, while I look in to this for you. Thank you.

Lornesta: ok. Thanks.

Michelle: Please ensure that your firewall has dndclient.exe and dndlauncher.exe listed as exceptions, and enabled to access the internet from your computer. If they already are, you may need to refresh the firewall settings. Do this by removing both files from the exceptions list, rebooting the computer, and re-adding both files to the exceptions list.

Lornesta: This is not a firewll issue

Michelle: Lornesta, I would like to inform you that you ned to refresh your firewall setting after every Patch.

Lornesta: The firewall would prompt me if there was a problem. If it was a firewall issue, I wouldn't even be able to access the game.

Lornesta: I'm a computer security engineer by trade. I can assure you this is not a firewall problem.

Michelle: Please let me know , if you are facing this issue with a specific character.

Lornesta: I only use one character. Lornesta on the Lhazaar server.

Michelle: I would request you to try log-in with another character, if you are able to play the game then contact to your in-game GM to resolve this issue.

Lornesta: Is there anyone else there that can assist. I don't think you are grasping the problem. I have opened three in game tickets already and was sent here. In addition I have already opened a ticket and added additional comments over the past day to your online ticket system with no response.

Lornesta: Please escalate this case to another engineer.

Michelle: One moment please, while I see if theSenior Technical representative is available. Thank you.

Lornesta: Thank you.

Michelle: I'm sorry, but the the Senior Technical representative is unavailable at the moment. However, I would suggest you to send an email at techsupport@turbine.com with the maximum information about the issue. Our Technical representative will answer you as soon as possible.

Lornesta: This is terrible customer service

Lornesta: Is there only one Senior Technical Representative?

Lornesta: You must be kidding....

Michelle: No Lornesta, There is not only one Senior Technical Representative but at this moment we are unable to connect you.

Lornesta: Why not?

Michelle: I know that you face a lot of problems but I am trying to resolve your my level best.

Lornesta: I appreciate your help, however I have been dealing with this issue for about a week now with no response from anybody at turbine. I have already done all of the steps you have suggested and I'm no further then when I started. I can't believe that there is nobody else available that might be able to assist.

Michelle: It seems that your issue is in-game issue. That is why I asked you to check and login with different character.

Lornesta: It is indeed an ingame issue, however the problem does not reside with my character, but rather with the patch that was just pushed out. Everything works fine if I reduce the resolution, it just looks like garbage. The problem is in the method in which DDO displays 2560x1600.

Lornesta: The pop up menu that says "Are you sure you want to recall, yes or no?" comes up off the screen, so I can never click on either yes or no.

Lornesta: In addition if I reduce the resolution, I can no longer go back to the higher one unless I manually alter the settings in the userpreferences.ini file.

Michelle: Give me a moment. I am looking at all the possible causes of the issues. I will be right back with a answer.

Michelle: Please Click on START>RUN and in the blank field type DXDIAG and click OK. That will bring up your Direct X Diagnostic Tool. Please respond with the following information listed on the SYSTEM TAB.
1. Operating System
2. Processor
3. Memory
4. Page file
5. DirectX Version

Michelle: I am waitng for you to respond.

Lornesta: 1. Operating System: Microsoft Windows XP Professional (5.1, Build 2600)
2. AMD Athlon(tm) 64 X2 Dual Core Processor 3800+, MMX, 3DNow (2 CPUs)
3. 2046MB RAM
4. 412MB Used, 3526MB Available
5. DirectX 9.0c (4.09.0000.0904)

Michelle: I would like to help you with this issue, but unfortunately this issue lies beyond my abilities. I will need to refer you to a senior support representative so you can be assisted further. One moment while I transfer you.

Lornesta: thank you


Transfering request, please wait...

40 Minutes into the support request........
A pop up appeared that said, "The representative has left the session. Thanks for chatting!"

Wow...what stellar customer support. I said it in my last ticket. Ridiculous! Seriously.

Round 2

Vinny: Thank you for contacting Turbine Technical Support. Which game can I help you with today?

Lornesta: DDO

Lornesta: Vinny, I was just talking with "Michelle" for the past 40 minutes. She said she was transferring me to a senior technical representative, but I was just disconnected.

Vinny: Hello,Lornesta could you please let us know the issue you are facing?

Lornesta: Can you connect me?

Vinny: Sure,Please wait



Transfering request, please wait...

50 minutes into support request......

Finally....after all of that waiting....I was taken to the following link.
http://turbine.fuzeqna.com/turbinesu...p?kbid=46&ao=t

Third Try with online support......

This time I could not even get another person online. I was just sent to the same link above of which I've already submitted a ticket through several days ago with no response. Ticket #11992.

Overall time wasted. 1 hour. Thanks for nothing Turbine.

[ChaosTheEternal]

Go into Options > Key Mapping

Scroll all the way to the bottom. Click the button Accept Choice and map a key or key combo to it (I mapped Ctrl+Enter).

Press Recall, then press what you mapped to "Accept Choice". You should begin recalling.

[Freeman]

Did you ever actually try changing your screen resolution? Even for long enough to see if the window would pop up? You never indicated if you had in your post. It would help to determine if the resolution was causing the problem or not.

[Lornesta]

Thank you ChaosTheEternal! Your suggestion worked. I also set my accept choice up with Ctrl-Enter and now I can recall again.

Freeman, I have changed resolutions and at every other resolution everything works just fine. It just doens't look as good on my monitor. Not only that, but once you change to the lower resolution, you can not switch back to the higher resolution unless you manually change the userpreferences.ini file. The same problem occurs. When I set it back to 2560x1600, it says click yes or no to accept your choice, but it doesn't let me click on either one. Strangely enough, the buttons are fully visible when trying to swich resolutions. Its only with recalling, finishing, logging off, or quitting that it appears off the screen.

In either case. ChaosTheEternal's suggestion works! Thanks again Chaos!

[ChaosTheEternal]

Good programs leave ways to do everything with just a keyboard. Even nowadays.

I commend the Turbine developers and UI designers for that much.

[Lornesta]

I agree with you. Now if only that information would make its way over to the support folks....

[Ziggy]

Thank you ChaosTheEternal! Your suggestion worked. I also set my accept choice up with Ctrl-Enter and now I can recall again.

Freeman, I have changed resolutions and at every other resolution everything works just fine. It just doens't look as good on my monitor. Not only that, but once you change to the lower resolution, you can not switch back to the higher resolution unless you manually change the userpreferences.ini file. The same problem occurs. When I set it back to 2560x1600, it says click yes or no to accept your choice, but it doesn't let me click on either one. Strangely enough, the buttons are fully visible when trying to swich resolutions. Its only with recalling, finishing, logging off, or quitting that it appears off the screen.

In either case. ChaosTheEternal's suggestion works! Thanks again Chaos!

im glad you got something to work, however dont you think the fact that you had to change the settings in your userpreferences.ini should clue you in that its not really turbines fault they couldnt help you, they no longer(if they did) support the resolution you are using.

[tihocan]

Make sure you bug report it too, as it shouldn't be too hard to fix, even if they don't want to officially support that resolution.

[Nott]

im glad you got something to work, however dont you think the fact that you had to change the settings in your userpreferences.ini should clue you in that its not really turbines fault they couldnt help you, they no longer(if they did) support the resolution you are using.

Turbine supports this resolution just as well today as they did a year ago (which is to say that it is supported; I've been using it that long). I don't know how the OP got into that state (I could speculate, but then I'd likely be accusing the OP of something falsely, such as using something which is unsupported), and it's unfortunate that an easier solution could not be had, but I don't see how screen resolution could have been the direct cause.